|
1-831-338-8250
North American
Cutting Systems
provides CNC machine tool REPAIR
SERVICES on all of the types of equipment we sell. On-site
service for Plasma Cutting Machines, Oxyfuel Torches, Flame Cutters,
CO2 Lasers, Abrasive Waterjet Systems, CNC Controls - Repairs and
Retrofits, along with training on a wide variety of CNC equipment.
|
Featured
Used Laser Machines
All used machines
are "Subject to Availability" and or prior sale.
|
1993
Tanaka LMX-II Gantry Laser
8 ft. x 40 ft. cutting zone
2500 watt G.E. Fanuc laser
Non-contact cutting head
G.E. Fanuc 16L CNC control
Closed loop chiller system
Complete with cutting table frame
Under power for inspection
Price - $99,500
- Make Offer |
1997 Cincinnati CL-707 laser w/LINEAR Drive
6 ft. x 12 ft. dual pallet Flying optics
system
Linear drive system 10,000 IPM on X & Y axis
Non-contact cutting head
2,000 watt Rofin SM laser
Cincinnati Pentium P.C. based CNC control
Safety Floor matts
Closed Loop dual circuit chiller
Good condition
*
Available Immediately
Price
- Contact
Duane @ 612-867-0295 |
2001
Amada Punch/Laser Automated Cell
33 tons Hydraulic ram, 58 station turret
50" x 72" punch zone w/o reposition
2,000 watt Fanuc laser w/21K hrs.
6 shelf tower, Model AS651H (5 ft. x 10 ft.)
Auto sheet load function
2 pallet Unload system, Model ULX510
Torit dust collector
Machine is under power for viewing
Available immediately.
Price - $Contact Duane
@ 612- 867-02950
As Is, Where Is |
|
1998
Trumpf L3030 Laser System
5 ft. x 10 ft. cut zone
Dual pallet exchange system
3,000 watt laser (exchange in 2004)
Closed loop chiller, dust collector
Non-contact cutting head (5" & 7.5")
Bosch CNC control
Full mezzanine set-up as shown
Under power for viewing
Price - $109,000 As
Is Where Is
Contact Duane @ 612-867-0295 |
1994 Laserdyne Model 890-IV 5-axis Laser
6 ft. x 10 ft. x 24" Z axis cutting zone
5-axis cutting system
System 94 CNC control system
1700 watt CO2 Rofin-Sinar laser system
Closed loop chiller system
*
Available Immediately
Price - $51,500.00 As
Is Where Is
Contact Duane @ 612-867-0295 |
2000 Mazak Model NTX-48 Laser
4 ft. x 8 ft. cut zone
1500 watt Panasonic laser w/ ? ? hrs.
Non-contact cutting head
CNC control = L-32B
Under power
Available Immediately
Price - $Call 612-867-0295 |
2001 Bystronic Bystar 3015 Laser
5 ft. x 10 ft. cutting zone w/dual pallet system
4,000 watt capacity laser w/37K hrs.
Material Storage Tower Load / Unload system
Programming software complete, Bysoft
Closed loop chiller system
System under power for viewing and inspection
Unit available to move out Jan., 2009
Price - Contact Duane @ 612-867-0295
for price and details |
|
Featured
Used Plasma Oxyfuel Machines
|
1996 ESAB Sabre 3000-10
Plasma Cutting System
Cantilever
10 ft. x 40 ft. cutting zone
Water cutting table
ESAB Vision 2000 CNC control
1 - ESP 600 amp plasma torch
1 - 100 amp plasma torch
1 - Oxyfuel torch
w/Closed loop chiller system
Under power for inspection
Price - $15,000
Make Offer
Will seperate table
|
(4) Water Cutting Tables
|
10' x 50' cutting area
2 years old average
Price - $Make
Offer
|
(1) Used water Table System
9-feet 10-inches inside, 21-feet in length.
10-feet 4-inches on outside
Price - $CALL |
Linde CM-100-9 System
8-feet cutting width by any length.
Can be equipped with any cutting process.
Configuration will determine price
Price - $CALL |
|
Linde
CM-250-C Cutting System
|
Cantilever
8-Feet Cutting Width, 30-feet cutting length.
Retrofitted with Lynx CNC control/Servo Drive.
4-Oxyfuel Cutting torches.
1-Thermal Dynamics PAK 45 Plasma.
8-feet X 20-feet Water table available.
(Overall width 9-feet, 11-inches.)
Location -
California for machine
Nevada for Water Table
Price - $9,800.00
|
6' by 20' Down Draft Table for
MG MMP
< No Picture >
Price - $ Call
L-TEC CM41-60 Oxyfuel System
Refurbished
L-TEC CM41-60 Oxyfuel Machine
2 Harris Torch
Effective Cutting 4' by 12'
Burny 2.5 CNC
Westinghouse HL90 Drive & Tracer
Price - $14,500.00 |
DACC Plasma-Oxy Cutting System
|
Large 14-Foot Width Gantry for cutting Long Bridge
Plates
140-Feet of Rail
(6) Oxyfuel Cutting Stations
(1) Hypertherm Plasma Plate Marker
Will ship from Portland, Oregon.
We will replace the older DOS based CNC Control with a Burny 10
LCD Plus.
Available Dec 1, 2009
Price - $CALL
|
1983 MG (10)Torch Cutting System
|
9'3" x 23'8" cutting area
(10) cutting torch heads
Price - $CALL
|
|
Featured
Misc. Used Items
|
Used Keller
USA Re-circulating Dust Collector
7,000 CFM , Long Life Filters
Silencer < 80 dba
30 HP., 3 phase, 460 v.
Size = W 61" x L 128" x H 173"
Sold with warranty
Contact
Duane at 612-867-0295
for sizing and pricing |
Keller USA Dust Collectors, Re-circulating
1500 cfm , 7.4 hp.,
spark pre-seperator, control
Low sound level (75 db)
SINBRAN Long Life filters
or Cartridge type filters
Contact us for sizing and pricing |
|
Nikon Wafer
Measurement System
Nikon Model VMR-C4540, NEX1V
NEW, never been used in production
Set-up for wafer carrier measurement
Unit under power for viewing and testing
Manufactured Dec., 2007
Price
- $99,000 As Is Where Is
Contact
Duane at 612-867-0295 |
Rofin-Sinar SM Laser Resonators
|
- 2000 SM resonator and control
- 1200 SM resonator and control cabinet
for parts or re-build
- some Rofin parts, SMPS power supply
Contact us for current list of
any used SM systems
Contact us for pricing and availability status
|
|
|
